Orbit Baby Helix Plus Double Stroller Version A - Manual (Page 18)

10 – ENGLISH – Manual Text Booklet – Orbit Baby Helix Plus Upgrade Kit
⚠
WARNING
⚠
PINCH HAZARD:
◦
Avoid injury from pinching or finger entrapment. Keep children away when inserting the
Helix SmartHub Attachment. Keep your hands clear of moving parts when inserting and
removing the Helix SmartHub Attachment.
FALL HAZARD:
◦
Always check that the Helix SmartHub Attachment is securely locked into the stroller frame
leg connectors before placing your child into stroller or starting to stroll. Pull backwards
on the Helix SmartHub Attachment and check that the red stripes on both sides are NOT
visible.
Assembling and attaching the Helix SmartHub Attachment
⃞ Insert the two Helix SmartHub Attachment wheels Ⓡ. You will hear a CLICK when they are locked
in place.
⃞ Grasp the Helix SmartHub Attachment with one hand while holding the stroller frame with
your other hand. Pull on the release lever Ⓝ and guide both tube ends into the stroller frame
leg connectors Ⓣ until they are fully inserted. You will hear a CLICK when the Helix SmartHub
Attachment is locked in place.
Attaching the ShadePad
⃞ Grasp the ShadePad Ⓐ by its sides and slide it over the handlebar while pulling it wide open, until
the ShadePad lines up with the end of the foam grip. Ensure that the clear window faces upward
and the flap with two snaps faces the handlebar.
⃞ Attach the strips of hook and loop fastener on the underside of the ShadePad. Make sure that in
doing so the upper two elastic bands remain covered.
⃞ Snap both corners of the ShadePad to the water bottle tray Ⓚ.
Assembly of the Orbit Baby Helix Plus Double Stroller Upgrade Kit is now complete.