One for All URC 7962 Smart Control Motion - Extra features manual - Manual (Page 3)

4
5
Press and release
the magic key.
6
Congratulations! You have successfully reassigned “stb” mode to become a
second “tv” mode.
Now simply follow “ONE FOR ALL SimpleSet”, “Direct Code Set Up” or the
“Search Method” to program your television in stb mode.
How to reset a device mode to its original mode?
1) Press and hold the magic key for 3 sec. --> All keys will light up twice.
2) Press 9 9 2.
3) Select the corresponding device mode you wish to reset to its original mode
(e.g. select stb).
4) Press the MAGIC key twice. All keys will light up twice.
Press and release the magic key. --> All keys will light up twice.
Select the
destination
device e.g. stb
< select >
1
Press and hold the magic key for 3 sec. --> All keys will light up twice
Press 9 9 2. --> All keys will light up twice
2
This feature gives you the possibility to program 2 (or more) of the same device types onto the ONE FOR ALL remote (e.g. two tv’s).
In the following example you wish to set up an additional television. Therefore we will reassign (change) “stb” mode into “tv” mode.
e.g. How to reassign “stb” into “tv” so you can control your second
televion as well:
Philips
Sony
TV1
TV2
+
3 sec.
2
3
Select the
source
device e.g. tv
< select >
Mode Reassignment
x2
x2
x2
URC-7962_English_Extra-Features_v2:URC-7960 08-11-11 13:35 Pagina 2