Northern Connectors Radiall N Series Coaxial Connectors - Manual (Page 9)

www.radiall.com
12-9
ENvIRONMENTAL CHARACTERISTICS
Temperature range standard models
semi-rigid cables
CECC
- 55°C + 155°C
- 55°C + 105°C
Thermo cycling test CECC - 55°C/+ 155°C/21 j
Thermal shock CECC - 40°C/+ 155°C or - 40°C/+ 85°C – 5 cycles
High temperature test CECC 125°C/1000 H
Corrosion salt spray CECC 48 H
Vibration CECC Sinus 10g/10 – 500 Hz
Shock CECC 1/2 Sinus 50g/11 ms
Moisture resistance clamp type
crimp type
IEC 529
IP 67
IP 65 (with heatshrink sleeve)
Hermetic test CECC 10 -5 bar. cm 3 /s
Leakage CECC Differential pressure 100 to 110 KPa: 1 bar cm 3 / H
MATERIALS
Body / nut / center male contact / outer contact Brass
Center female contact Treated beryllium copper
Ferrule Brass
Insulator PTFE
Gasket Silicon elastomer
PLATING
Standard Intermodulation models + COAXI-KIT
Body crimp + clamp type
solder type
BBR
Gold
Silver + BBR
Silver
Coupling nut/Design BBR/cross knurled BBR/hex.
Center contacts Gold Silver
Outer contacts/Design BBR/slotted Silver + BBR/non slotted
Test/characteristics Standard reference Values/remarks
ELECTRICAL AND MECHANICAL CHARACTERISTICS
Impedance 50Ω
Frequency range DC - 6 GHz
Typical VSWR (straight models) 1.2 at 6 GHz
Temperature range - 40°C/+ 85°C
Durability 100 mating cycles
MATERIALS AND PLATING
Component Materials Platings
Connector body Brass BBR
Insulator PTFE / Polypropylene
Female center contact Bronze Center contact Gold 0.1 µm (typical)
Outer contact Brass BBR
PACKAGING
Packaging / MOQ (1)
50 pieces bulk / MOQ 1000 pieces
Unit packaging / MOQ 100 pieces
(1) MOQ = Minimum Order Quantity
Some connectors may feature different performances depending on the application
they have been designed for, or according to the applicable cable.
N 50
Ω
/e
Co
N
CHARACTERISTICS
CHARACTERISTICS ECO N