Northern Connectors Conec IP67 D-Sub Filter Connectors - Manual (Page 3)

F 9 P M 4 B O 6 S T A 0 3 X 0
5|2
Part Number Creator
Product Line
4* = Shell brass tin plated with plastic frame or without frame
6 = Shell brass tin plated with metal frame (Standard)
(*on request)
Variations
STF = D-Subminiatur Standard filtered
HDF = D-Subminiatur High Density filtered
No. of pos. for STF No. of pos. for HDF
09 = 09 pos. 15 = 15 pos.
15 = 15 pos. 26 = 26 pos.
25 = 25 pos. 44 = 44 pos.
37 = 37 pos. 62 = 62 pos.
50 = 50 pos. 78 = 78 pos.
P = Plug connector (Standard)
(Socket connector on request)
Capacitance
01 = 180 pF ± 20% tolerance
03 = 370 pF ± 20% tolerance
04 = 830 pF ± 20% tolerance
05* = 1300 pF ± 20% tolerance *not applicable for HDF
Mounting style
A1 = Riveted through hole for cable mount Shell without sealing frame
B2 = M3 threaded insert
B3 = 4-40 UNC threaded insert
B4 = Threaded lock for M3 front mounting
B5 = Threaded lock for 4-40 UNC front mounting
E1 = M3 threaded rear spacer with PCB clip, PCB .063" 1.60 mm
E2 = 4-40 UNC threaded rear spacer with PCB clip, PCB .063“ 1.60 mm
S1 = Metal bracket, M3 threaded insert
S2 = Metal bracket, 4-40 UNC threaded insert
S3 = Metal bracket, M3 threaded insert and PCB clip
S4 = Metal bracket, 4-40 UNC threaded insert and PCB clip
R1 = Metal bracket, M3 threaded insert
R2 = Metal bracket, 4-40 UNC threaded insert
R3 = Metal bracket, M3 threaded insert and PCB clip
R4 = Metal bracket, 4-40 UNC threaded insert and PCB clip
Quality class Plating code for contacts
A = Quality class 3 = 50 mating cycles
B = Quality class 2 = 200 mating cycles
C = Quality class 1 = 500 mating cycles
Termination
M = Solder cup only for STF
R = Solder pin, straight
T = Solder pin, angled, .189“ 4.80 mm only for STF
U = Solder pin, angled, .276“ 7.00 mm only for STF
Z = Solder pin, angled, .465“ 11.80 mm only for STF
Y = Solder pin, angled, .220“ 5.60 mm only for HDF
OX = Standard
IP67 Filter D-SUB Connectors