Northern Connectors Alpha Wire FIT Heat-Shrink Tubing - Manual (Page 29)

Alpha Wire | www.alphawire.com | 1-800-52 ALPHA
Specifications subject to change. For complete specifications and availability, visit www.alphawire.com.
471
FIT > FIT-PRINT Heat-Shrinkable Identification System
Heat-Shrink Tubing
FIT®-PRINT Heat-Shrinkable Identification System
3:1 Shrink Ratio, XLPO
UL 224
CSA 198
MIL-STD-202F Method 215J
• Permanent, smear-resistant
marking
• Identification for cable or
harness assemblies
Operating Temperature
• -30°C to +105°C
Shrink Temperature
• 90°C min.
• 125°C full recovery
Material
• Cross-linked polyolefin
Colors
• White, yellow
Physical Properties
• Tensile strength: 1160 psi
(8.0 N/mm 2 )
• Elongation: 150% min
• Longitudinal change: 20%
• Flame retardant
• Shelf life: 3 years at 18°C to 35°C
Chemical Properties
• Corrosive effect: none
• Fungus resistance: no growth
• Water absorption: 0.5%
Electrical Properties
• Dielectric strength: 20 V/mil
(7.9 kV/cm)
• Volume resistivity: 10 14 ohm-cm
Availability
250 tubing pieces per package
Part No
Range Supplied ID, Min. Recovered ID, Max.
Recovered
Wall Thickness, Nom.
AWG Inch mm Inch mm Inch mm Inch mm
FIT-PRINT-1/8 22 – 16 0.344 – 1.374 8.74 – 34.90 0.125 3.18 0.042 1.07 0.023 0.58
FIT-PRINT-1/4 16 – 8 1.374 – 3.264 34.90 – 82.92 0.250 6.35 0.083 2.11 0.023 0.58
FIT-PRINT-1/2 8 – 2 3.264 – 6.543 82.92 – 166.19 0.500 12.70 0.166 4.22 0.023 0.58
FIT-PRINT-1 2 – 4/0 6.543 – 10.2 166.19 – 259.08 1.000 25.40 0.333 8.46 0.023 0.58
To economically meet the
wire identification needs of the
electronic interconnect, industrial,
computer office automation,
marine, and electrical markets,
FIT-PRINT sleeves allow smear-
resistant, permanent identification.
The sleeves, available in white or
high-visibility bright yellow, feed
directly into dot matrix printers
(high carbon content ribbon
recommended). A standard ball-
point pen may also be used.