Northern Connectors Souriau MBG Plastic Circular Connectors - Manual (Page 13)

13
MBG Series
#16 coaxial contacts
We provide 2 types of coaxial contacts suitable for 50 or 75
, coaxial cable or twisted pair cable.
Monocrimp coaxial contact
• The monocrimp one-piece coaxial contacts offer high reliability plus
the economic advantage of a 95% reduction in installation time over
conventional assembly methods.
• This economy is achieved by simultaneously crimping both the inner
conductor and outer braid or drain wire.
Multipiece crimp coaxial contact
• The inner conductor and outer braid is crimped individually.
• The thermoplastic insulating bushing in the outer body is designed
to accept and permanently retain the inner contact.
• An outer ferrule is used to connect the braid to the outer contact
and provide cable support to ensure against bending and vibration.
Suitable for Coaxial cable or Twisted cable
• For jacket diameter from 1.78 to 3.05mm
Inner conductor up to 2.44mm diameter • For jacket diameter from 0.64 to 1.45mm
Inner conductor from AWG30 to AWG24
Contacts for coaxial cable summary
Contact type
Contact range
Contact part number with
cable combination
Cabling notice
Male contact Female contact
Multipiece RMDXK10D28 RCDXK1D28
See page 16
See pages 20 & 21
Monocrimp RMDX60xxD28 RCDX60xxD28 See page 22
Contacts for twisted pairs cable summary
Contact type
Contact range Contact part number with
cable combination
Cabling notice
Male contact Female contact
Multipiece
RMDXK10D28
+ YORK090
RCDXK1D28
+ YORK090
See page 17
See page 18
Monocrimp RMDX60xxD28 RCDX60xxD28 See page 19
Coaxial contact range