Behringer 1202FX - Manual (Page 12)

12
XENYX 1002FX/1202FX
BEHRINGER is constantly striving to manintain the highest professional
standards. As a result of these efforts, modifications may be made from
time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
5. SPECIFICATIONS
Mono inputs
Microphone inputs
Type
XLR, electronically balanced,
discrete input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 W source resistance
-132.7 dB / 137 dB A-weighted
@ 50 W source resistance -130 dB / 133.9 dB A-weighted
@ 150 W source resistance -127.1 dB / 130.9 dB A-weighted
Frequency response <10 Hz - 200 kHz (-1 dB)
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kW balanced
Signal-to-noise ratio -107 dB / -111 dB A-weighted
(0 dBu In @ +22 dB gain)
Distortion (THD+N) 0.005% / 0.003% A-weighted
Line input
Type
¼" TRS connector
electronically balanced
Impedance approx. 20 kW balanced
10 kW unbalanced
Gain range -10 to +40 dB
Max. input level +20 dBu @ 0 dB Gain
Fade-out attenuation 1
(Crosstalk attenuation)
Main fader closed
85 dB
Channel fader closed 88 dB
Frequency response
Microphone input to main out
<10 Hz - 80 kHz
+0 dB / -1 dB
<10 Hz - 137 kHz +0 dB / -3 dB
Stereo inputs
Type
¼" TRS connector,
electronically balanced
Impedance approx. 20 kW bal. / 10kW unbal.
(+4 dBu operating level)
approx. 20 kW bal. / 5kW unbal.
(-10 dBV)
Max. input level +22 dBu
EQ mono channels
Low
80 Hz / ±15 dB
Mid 2.5 kHz / ±15 dB
High 12 kHz / ±15 dB
AUDIO OUTPUTS
FX send
Type
¼" TRS connector, unbalanced
Impedance approx. 120 W
Max. output level +22 dBu
Main outputs
Type
¼" TRS connector, unbalanced
Impedance approx. 120 W
Max. output level +22 dBu
Control room outputs
Type
¼" TRS connector, unbalanced
Impedance approx. 120 W
Max. output level +22 dBu
Headphones output
Type
¼" TRS connector, unbalanced
Max. output level +19 dBu / 150 W (+25 dBm)
Main mix system data 2
Noise
Main mix @ -oo,
Channel fader -oo
-105 dB / -108 dB A-weighted
Main mix @ 0 dB,
Channel fader -oo
-94 dB / -97 dB A-weighted
Main Mix @ 0 dB,
Channel fader @ 0 dB
-83 dB / -85 dB A-weighted
FX section
Converter 24-Bit Sigma-Delta
Sampling rate 40 kHz
Power supply
Power consumption
1002FX: 16 W
1202FX: 17 W
Mains voltage
USA/Canada 120 V~, 60 Hz, MXUL6 adapter
U.K./Australia 240 V~, 50 Hz, MXUK6 adapter
Europe 230 V~, 50 Hz, MXEU6 adapter
China/Korea 220 V~, 50 Hz, MXCN6 adapter
Japan 100 V~, 60 Hz, MXJP6 adapter
Dimensions
1002FX
Dimensions (H x W x D)
1 5/6" / 1 1/2" x 7 2/5" x 8 2/3"
(47 mm / 37 mm x 189 mm x
220 mm)
Weight (net) approx. 2.31 lbs (1.05 kg)
1202FX
Dimensions (H x W x D)
1 5/6" / 1 1/2" x 9 1/2" x 8 2/3"
(47 mm / 37 mm x 242 mm x
220 mm)
Weight (net) approx. 2.97 lbs (1.35 kg)
Measuring conditions:
1: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.
2: 20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all
channels on main mix; channels 1/3 as far left as possible, channels 2/4 as far
right as possible. Reference = +6 dBu.
5. SPECIFICATIONS