Bryston SP1.7 Series - Manual (Page 20)

SET UP and CALIBRATION OF THE SP1.7
NOTE: In most operating menu modes the last segment of line 2 of the display will either show an “X” for
EXIT, or an “>” (arrow) to indicate more menu items. (sample screens are shown below - fig 11,12).
Choosing (highlighting) the “X” position in the display and pressing the Select button (see below) will
“EXIT” back to the previous menu, or exit the menu mode entirely. If an “>” appears, continue pressing
the menu navigation arrow buttons to reveal more menu options.
In order to fully enjoy the capabilities of the SP1.7 you or your dealer must first set-up and calibrate the SP1.7.
This is a critical step in insuring that all your loudspeakers are properly designated within the unit and that all
levels and delays are properly set.
To accomplish this process the following tools are needed:
1. Tape measure or other means of determining the distance of each speaker from the chosen listening positions.
2. Sound Level Meter. This device insures that all loudspeaker levels are precisely matched and set accurately.
This step cannot accurately be done by ear, a test instrument should be used to ensure proper calibration. (The
Radio Shack Analog SPL meter is inexpensive and eminently suitable for this task. Your dealer may have one.)
IMPORTANT: When using the Pink Noise generator within the SP1.7 for speaker level calibration, the salient
point is that all channels measure equal dB. After pushing the test button, the pink noise will start in the front
left speaker. Record the dB level from this speaker (with the level trim value at 0 dB on the LCD Display or on
the Video Monitor when using the Bryston SPV-1), and adjust all the others to match it. It is not critical to reach
some specific dB level (ex. 85 dB), it is more important that all channels are at equal levels.
Please Note: If for any reason you are not sure that you can accomplish this calibration task or have any
doubts as to how it should be done, please contact your dealer or Bryston technical support BEFORE
attempting this process. Most Bryston Dealers can provide this service. Please contact your dealer for
their policies and procedures in this regard.
18
Figure 11: Arrow direction indicates
more menu items
Figure 12: Highlight “X” to exit