Multiquip CDM1H - Manual (Page 6)

PAGE 6 —CDM1H CORE DRILL — OPERATION AND PARTS MANUAL — REV. #6 (09/08/10)
Other important messages are provided throughout this
manual to help prevent damage to your drill, other property,
or the surrounding environment.
CAUTION - Equipment Damage Hazards
ALWAYS wear approved eye and
hearing protection.
CAUTION - Eye and Hearing Hazards
ALWAYS place the core-drill's ON/OFF
switch in the OFF position when the drill
is not in use.
CAUTION - Accidental Starting Hazards
CDM1H HAND-HELD CORE DRILL— SAFETY MESSAGE ALERT SYMBOLS
Safety precautions should be followed at all times when operating
this equipment. Failure to read and understand the Safety
Messages and Operating Instructions could result in injury to
yourself and others.
FOR YOUR SAFETY AND THE SAFETY OF OTHERS!
SAFETY MESSAGE ALERT SYMBOLS
The three (3) Safety Messages shown below will inform you
about potential hazards that could injure you or others. The
Safety Messages specifically address the level of exposure
to the operator, and are preceded by one of three words:
DANGER, WARNING, or CAUTION.
HAZARD SYMBOLS
Potential hazards associated with the operation of the MQ
Model CDM1H Core Drill will be referenced with Hazard
Symbols which appear throughout this manual, and will be
referenced in conjunction with Safety Message Alert
Symbols.
You WILL be KILLED or SERIOUSLY injured if you DO
NOT follow directions.
DANGER DANGER DANGER DANGER DANGER
You CAN be KILLED or SERIOUSLY injured if you DO
NOT follow directions.
WARNING WARNING WARNING WARNING WARNING
You CAN be INJURED if you DO NOT follow directions.
CAUTION
CAUTION CAUTION CAUTION CAUTION CAUTION
ALWAYS wear approved respiratory
protection when required.
WARNING - Respiratory Hazards
NEVER tamper with the factory settings
of the core drill. Personal injury and
damage to the core drill can result if
operating in speed ranges above
maximum allowable.
Rotating drill bit can cut and
crush. Keep hands and feet
clear.
CAUTION - Over Speed Conditions
CAUTION - Rotating Drill Bit
This Operation and Parts Manual has been
developed to provide complete instructions for the
safe and efficient operation of the
MQ Model CDM1H
Core Drill.
Before using this core drill, ensure that the operating
individual has read and understands all instructions in this
manual.