Str36sp-series — controls and indicators – Multiquip STR36SP User Manual
Page 19

STR36SP- SERIES • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #1 (09/16/11) — PAGE 19
STR36SP-SERIES — CONTROLS AND INDICATORS
17. Safety Stop Switch – Shuts down engine when seat is
empty.
18. Light Assembly (Option) – Optional 12 volt halogen lights
are available, two forward and one aft.
19. Lift Loops – Located on both sides of the main frame.
Used to lift the trowel.
20. Engine Air Filter – Protects the engine from dirt.
21. Oil Filter – Filters the engine oil.
22. Oil Drain – Remove the plug from end of hose to drain the
engine oil.
23. Retardant Spray Tank – Holds 5 gallons of retardant.
24. Retardant Spray Pump – Delivers retardant to the spray
nozzle.
25. EZ- Mover Boss – Rear attachment point for EZ Mover.
Used to transport the trowel.
26. Spiders (Left/Right) – Consists of trowel arms, blades,
wear plate, and thrust collar.
27. Document Box – Contains all product documentation.
28. Battery – Provides +12V DC power to the electrical system.
29. Belt Guard – Encloses drive belt used in conjunction with
clutch.
30. Engine Oil Fill – Remove this cap to add engine oil.
Figure 3. STR36SP-SERIES Controls and Indicators
(Rear)
Read, understand, and comply with all safety messages and
operating instructions in this manual before attempting to operate
the trowel.
NOTE
ENG
INE
FUE
L O
NLY
RETA
RDA
NT O
NLY
24
28
20
19
9
10
19
18
15
23
25
25
26
29
21
22
17
27