Multiquip LS-60TD - Manual (Page 25)

MAYCO LS-60TD PUMP — OPERATION AND PARTS MANUAL — REV. #4 (09/15/11) — PAGE 25
LS-60TD PUMP — INSPECTION
ENGINE OIL CHECK
7. Remove the engine oil dipstick from its holder
(Figure 11).
Figure 11. Engine Oil Dipstick
10. Verify that oil level (Figure 12) is maintained between
the two notches on the dipstick.
11. If the pump's engine oil is low, fill engine crankcase
with lubricating oil through filler hole, but DO NOT overfill.
8. Make sure pump/engine is placed on level ground.
9. Pull the engine oil dipstick (Figure 12) from its holder.
Figure 12. Engine Oil Dipstick
HYDRAULIC OIL CHECK
13. Determine if the hydraulic oil level is low by observing
the level of the oil in the Hydraulic Oil Sight Glass
(Figure 13).
12 The oil listed in Table 4 is recommended to ensure better
engine performance. Use class CD or higher grade motor
oil.
Figure 13. Hydraulic Oil Sight Glass