Multiquip C30HDNI - Manual (Page 9)

MAYCO C-30HDNI (ZENITH) PUMP — OPERATION AND PARTS MANUAL — REV. #11 (04/03/12) — PAGE 9
C-30HDNI (ZENITH) PUMP — SAFETY MESSAGE ALERT SYMBOLS
ALWAYS place the Engine ON/OFF switch
in the OFF position and remove the ignition
key when the pump is not in use.
ALWAYS wear approved respiratory
protection.
ALWAYS wear approved eye and
hearing protection.
Other important messages are provided throughout this manual
to help prevent damage to your concrete pump, other property,
or the surrounding environment.
This pump , other property, or the
surrounding environment could
be damaged if you do not follow
instructions.
NOTE
NEVER tamper with the factory settings of
the engine governor or settings. Personal
injury and damage to the engine or
equipment can result if operating in speed
ranges above maximum allowable.
CAUTION - OVER-SPEED CONDITIONS
CAUTION - ACCIDENTAL STARTING
CAUTION - RESPIRATORY HAZARDS
CAUTION - SIGHT AND HEARING HAZARDS
CAUTION - EQUIPMENT DAMAGE MESSAGES
NEVER operate equipment with covers,
or guards removed. Keep
fingers , hands ,
hair and clothing away from all moving
parts to prevent injury.
WARNING - ROTATING PARTS