Ga-3.6rz3 — preparation for long -term storage – Multiquip GA-3.6RZ3 User Manual

Page 18

Text mode
Original mode

PAGE 18 — GA-3.6RZ3 A.C. GENERATOR— PARTS & OPERATION MANUAL — REV. #3 (09/03/04)

Generator Storage

For storage of the generating set for over 30 days, the
following is required:
z Drain the fuel tank completely.
z Run the engine until the gasoline in the carburetor is

completely consumed.

z Completely drain the oil from the crankcase and refill

with fresh oil.

z Remove the spark plug, pour 2 or 3 cc of SAE 30 oil

into the cylinder and crank slowly to distribute the oil.

z Slowly rotate the engine a few times with the starter

Rope and install a new plug.

z Pull out the starter rope slowly and stop at the

compression point.

z Clean all external parts of the generating set with a cloth.
z Cover the generating set and store in a clean, dry place.

GA-3.6RZ3 — PREPARATION FOR LONG -TERM STORAGE