Blaupunkt MEMPHIS MP66 7 646 520 310 - Manual (Page 51)

Changing basic settings in the settings menu
115
Changing volume presettings ( Volume Settings)
In the "Volume Settings" menu, select the volume presettings for traf-
fi c announcements, the telephone, the signal tones, etc.
Press the MENU button ? . The settings menu appears.
Press the softkey 9 (next to "Volume Settings").
The "Volume Settings" menu appears. The volume presettings are
displayed as two-digit numbers. One of the two menu items "On Vol-
ume" or "Last Volume" is highlighted.
Traf Volume
Volume Settings
Last Volume
On Volume
15
Volume
Traffic Volume
Phone Volume
Beep Volume 15
25
03 On Volume 10
Last Volume
10
Last Volume active
Phone Volume
25
Beep Volume
03
➔
➔
Changing the volume presetting
of traffi c announcements ( Traffi c
Volume)
If the device puts a traffi c an-
nouncement through, you hear it
at the preset volume.
Press the softkey 7 (next to
"Traffi c Volume").
The volume presetting for traf-
fi c announcements appears.
Adjust the desired volume
using the volume control
5
or the rocker switch 3 (incre-
ments 1 to 50).
➔
➔
If a traffi c announcement is
broadcast, the device automat-
ically puts it through at this
volume. During the traffi c an-
nouncement, you can always
change the volume by means of
the volume control
5 .
Changing the volume presetting
of the telephone ( Phone Volume)
If the device puts a phone call
through, it always starts at the pre-
set volume.
Press the softkey 8 (next to
"Phone Volume").
➔
02_BA_Memphis_EU_eng.indd Menü115 02_BA_Memphis_EU_eng.indd Menü115 03.05.2006 10:44:11 Uhr 03.05.2006 10:44:11 Uhr