Ar-13h ride-on roller — maintenance – Multiquip AR13H User Manual

Page 33

AR-13H RIDE-ON TANDEM DRUM ROLLER — OPERATION & PARTS MANUAL — REV. #15 (09/15/11) — PAGE 33

STEP 2

STEP 1

STEP 3

1. JACK FRAME UP SLIGHTLY AT

ARTICULATION JOINT.

2. REMOVE THE FOUR ALLEN HEAD

SCREWS HOLDING THE SIDE

COVER OF THE DRUM SUPPORT

PLATE.

3. MARK AND DISCONNECT

HOSES FROM MOTOR AND

MANIFOLD.

4. REMOVE FOUR ALLEN HEAD

SCREWS FROM DRUM SUPPORT

PLATES.(SCREWS MAY NEED TO BE

HEATED TO REMOVE)

STEP 4

FRONT

DRUM

5. REMOVE NUTS SECURING FLANGE

ASSEMBLY TO DRUM SUPPORT PLATE

AND PULL OFF OF FLANGE ASSEMBLY.

6. REMOVE THE SIX 9/16 BOLTS SECURING

EXCITER PLATE TO DRUM WALL

STEP 5

STEP 6

7. PULL EXCITER ASSEMBLY TO

REMOVE FROM DRUM INTERIOR.

8. REVERSE PROCEDURES TO

REASSEMBLE DRUM. USE

LOCKTITE 271 ON ALL BOLTS

AND NUTS.

STEP 7

AR-13H RIDE-ON ROLLER — MAINTENANCE

Figure 37. Front-Right Drum Removal