Multiquip MT65H - Manual (Page 7)

MT-65H — OPERATION & PARTS MANUAL — REV. #4 (06/30/05) — PAGE 7
MT-65H — SAFETY MESSAGE ALERT SYMBOLS
ALWAYS place the ON/OFF switch in
the OFF position when the rammer is
not in use.
ALWAYS wear approved eye and
hearing protection.
NEVER operate equipment with covers,
or guards removed. Keep fingers, hands,
hair and clothing away from all moving
parts to prevent injury.
Rotating Parts Hazards CAUTION CAUTION CAUTION CAUTION CAUTION
Accidental Starting Hazards
CAUTION CAUTION CAUTION CAUTION CAUTION
Eye and Hearing Hazards
CAUTION CAUTION CAUTION CAUTION CAUTION
Other important messages are provided throughout this
manual to help prevent damage to your light tower, other
property, or the surrounding environment.
Equipment Damage
Hazards
CAUTION CAUTION CAUTION CAUTION CAUTION
CAUTION CAUTION CAUTION CAUTION CAUTION Lifting Handle
Before starting operation, check the lifting handle to
make sure there is no damage on the bolts, no cracks
or breakage on the handle, and no fissure on the surface.
This handle is for manual lifting only. Use handle to
lift the shoe part of the rammer with the body laid down
on the ground or truck bed. Use proper lifting techniques
to avoid back injury.
Do not use this rammer as a rammer lift point. Use the
lifting point on top of the rammer.
Do not move the rammer with the lifting handle and the
front rollers more than 5 meters.
NEVER refuel rammer when placed in truck bed with
plastic liner. The possibility exists of explosion due to static
electricity. When adding fuel, remove rammer from truck
bed and place on ground.
Refueling Hazard
DANGER DANGER DANGER DANGER DANGER
CAUTION - Read Manual
Before attempting to operate
the pump, and to avoid
serious injury to personnel,
always read and understand
operation manual. Failure to
read and understand
operation manual could
result in serious harm or
even death!
CAUTION CAUTION CAUTION CAUTION CAUTION Read Manual