Behringer TRUTH B2031P - Manual (Page 7)

7
TRUTH B2030P/B2031P
4. SPECIFICATIONS
3.3 Adapting the TRUTH to the room acoustics
To acoustically adapt your TRUTH to your control room, in
cases when the speakers are located in unusual places or when
you have specific sound requirements, you may have to use an
external equalizer. It should be connected in the signal path
between your mixing console and your amp.
The BEHRINGER ULTRACURVE PRO DEQ2496 has proven its
usefulness in practice, as it is not only a simple equalizer but
also features a real-time analyzer. You can use our measuring
microphone ECM8000 to automatically adapt the TRUTH to your
room or modify its frequency response.
As a general rule, you should set up and adjust the TRUTH
with great care. Above all, you should take your time: unlike hi-fi
speakers, the TRUTH is tuned to produce a neutral sound, which
can be confusing when you are working for the first time with
such a high-quality speaker. Don’t try to adjust the TRUTH with
an equalizer to produce a “bombastic” sound that impresses you
or other listeners. To get a feeling for the TRUTH’s sound, you
should listen to as many records as possible that were produced
in other studios. We also recommend that you listen to your own
recordings over as many other systems as possible, for example,
your car system. If you find that your mixes are somewhat “dull”
in their overall sound, the reason might be too much treble from
your TRUTH. On the other hand, if you set the bass level too
high, you will find that your mixes lack bass power. Tuning a
speaker can take several days’ time, so once again: take your
time!
4. SPECIFICATIONS
CONNECTORS
Type Binding posts
SYSTEM SPECIFICATIONS
B2030P
Power rating 100 watts
Impedance 8 Ω
Frequency response 75 Hz to 21 kHz
Sound pressure level 89 dB (1 W/1 m)
B2031P
Power rating 150 watts
Impedance 4 Ω
Frequency response 55 Hz to 21 kHz
Sound pressure level 89 dB (1 W/1 m)
COMPONENTS
B2030P
Tweeter ¾" dome, ferrofluid-cooled
Woofer 6 ¾" polypropylene diaphragm
B2031P
Tweeter 1" dome, ferrofluid-cooled
Woofer 8 ¾", polypropylene diaphragm
CROSSOVER
B2030P
Crossover frequency 2.3 kHz
B2031P
Crossover frequency 2 kHz
DIMENSIONS/WEIGHT
B2030P
Dimensions (H x W x D) 12 1/2" (317 mm) x 8 2/5" (214 mm)
x 8 3/10" (211 mm)
Weight 15 1/3 lbs. (7.0 kg)
B2031P
Dimensions (H x W x D) 15 4/5" (401 mm) x 10 1/10" (257 mm)
x 10 1/2" (267 mm)
Weight 25 1/3 lbs. (11.5 kg)
BEHRINGER is constantly striving to maintain the highest professional
standards. As a result of these efforts, modifications may be made from
time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.