MotorGuide X3-40 - Manual (Page 20)

TROLLING MOTOR INSTALLATION AND OPERATION
16
eng
4. Use four #8 x 2 in. stainless steel screws to secure the foot pedal to the boat
deck.
54589
Installing the Motor into the Bow Mount
a - Steering tension collar (hand‑operated
models only)
b - Bracket door
c - Bracket door knob
1. Turn the bracket door knob counterclockwise to loosen and open the bracket
door.
2. Place the motor column into the bracket and close the door.
3. Turn the bracket door knob clockwise to tighten the motor column in the
bracket.
Removing the Motor from the Bow Mount
1. Turn the bracket door knob counterclockwise to loosen and open the bracket
door.
2. Remove the motor column from the bracket and close the door.
a
b
c
54517