Bowers & Wilkins CDM7 SE - Manual (Page 20)

Description
Drive units
Frequency range
Frequency response
Dispersion
Sensitivity
Harmonic distortion
Nominal impedance
Crossover frequencies
Power handling
Max. recommended cable impedance
Dimensions
Net Weight
Finishes
CDM ™ 7SE
Kevlar is a registered trademark of Dupont.
B&W Loudspeakers Ltd. reserves the right to amend details of the specification without notice in line with technical developments.
Copyright © B&W Loudspeakers Ltd. Printed in England.
B&W Loudspeakers Ltd, Meadow Road, Worthing, BN11 2RX England
Tel: +44 (0) 1903 524801 Fax: +44 (0) 1903 524725 http://www.bwspeakers.com
3-way 4th-order vented-box system
1x 165mm (6 1 ⁄
2
in) Paper/Kevlar ® fibre cone bass
1x 165mm (6 1 ⁄
2
in) woven Kevlar ® cone bass/midrange
1x 26mm (1in) metal dome high-frequency
-6dB at 30Hz and 30kHz
40Hz – 20kHz ±3dB on reference axis
Within 2dB of response on reference axis
Horizontal: over 40° arc
Vertical: over 10° arc
90dB spl (2.83V, 1m)
2nd & 3rd harmonics < 1% 45Hz – 20kHz (90dB spl,1m)
8 Ω (minimum 4 Ω )
150Hz,3kHz
30W – 150W continuous into 8 Ω on unclipped programme
0.2 Ω
Height: 950mm (37 3 ⁄
8
in)
Width: 220mm (8 5 ⁄
8
in)
Depth: 290mm (11 3 ⁄
8
in)
18.5kg (40.7lb)
Cabinet: Real wood veneers of black ash, red ash or cherry.
Grille:
Black cloth
I4863