Bowers & Wilkins DM110i - Manual

DM110i
Stand-mount/Bookshelf loudspeaker system
Product Summary
● The DM110i is a 2-way vented box standmount/bookshelf system with high power handling
capacity.
● Super sensitive, with high acoustical output yet affordable.
Technical highlights
● Modal analysis techniques revealed a simple bonding technique of corner joints could improve
rigidity and reduce coloration.
● New thinking on crossover design has also led to the provision of higher safe power handling
and fuse protection overload.
● The driver chassis have non-magnetised castings for all the bass midrange units ensuring resonant
free high-level sound of the highest amplitude.
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com
Drive Units
Frequency Response
1 x 26mm high-frequency driver with
dome/coil construction of special
polymide material
1 x 200mm nominal piston dia and
26mm high temperature voice coil with
critically impregnated composite short
fibre cone
± 3dB 70Hz to 20kHz
Sensitivity
Power Handling
Dimensions
Finish
90dB (2.83V, 1m)
10W – 75W
Height: 490mm Width: 260mm
Depth: 250mm
American Walnut or Black Ash vinyl