Memmert WNB 7 - 45 Waterbaths (Generation 2003) - Manual (Page 12)

BASIC page 12
6 Monitoring the programme sequence
Bath does not heat up
During the delayed switch-on the symbol
flashes and the display alternates between
residual time and actual temperature
°C
°C
Bath heats up
After the end of the delayed switch-on the
symbol goes dark and the bath heats up to
the selected setpoint temperature. Heating is
indicated by the symbol.
°C
Bath holds setpoint
temperature
During the hold time the symbol flashes
and the display alternates between the residual
time and the actual temperature.
°C
°C
Heating is switched off
After the hold time has elapsed the symbol
goes dark, the heating is switched off, and
the display alternates between the actual
temperature and “end“.
°C
°C
*
t
90°C
hold 4h
delay 6h
*
t
90°C
delay 6h
hold 4h
*
t
90°C
hold 4h
delay 6h
*
t
90°C
delay 6h
hold 4h