MEElectronics Air-Fi Metro2 AF72 - Manual (Page 16)

14
CLEANING INSTRUCTIONS
a) Remove the ear tips and the stabilizer fins from the earphones
b) Take a cotton swab that is either dry or has been dampened by a small
amount of rubbing alcohol or soapy water
c) Swab around the nozzle of the earphone
d) Swab the ear tip including the inside of the eartip
e) Swab the inside of the stabilizer fin ring
Note: Ear tips and stabilizer fins can also be submerged fully in rubbing
alcohol or hydrogen peroxide
f) Wait for the earphones and ear tips to dry completely
g) Put the ear tips and fins back on the earphone, making sure they are
fitted securely. Always make sure ear tips are installed properly on the
earphone nozzle to avoid an ear tip coming off in your ear.
Clean the cable and earphone housing as necessary using a cloth dampened
with soapy water, and then again with a damp cloth. Using chemical cleaners
on the Metro2 may cause discoloration and hardening of the cable and is not
recommended.
CARE AND SAFETY
• Do not use your wireless headset around flammable gases as fire or
explosion may occur.
• Keep the device and packaging out of reach of children.
• There are no user replaceable/reparable parts in the headset. Disas-
sembly will void your warranty.
• Do not expose the headset to excessive heat or cold, moisture, sweat,
water, or other liquids. Doing so will void your warranty.
• Do not drop the device.
STORAGE
When not in use or charging, store the Metro2 in the included carrying case.
Storing or transporting the Metro2 in a pocket or bag without using the case
may decrease the lifespan and void the warranty.
SPECIFICATIONS
See the Air-Fi Metro2 product page at www.meelec.com for product
specifications
TROUBLESHOOTING
Visit www.meelec.com/bluetooth for troubleshooting information