Meade Instruments TE688W User Manual
Page 17

TIME ZONE
• Press MODE button once to select hour and minutes with the 
 day of the week display.
• Select the Time Zone by pressing and holding UP ( ? ) button 
 for 3 seconds 
• Keep holding UP ( ? ) button until the desired US Time Zone 
 (Pacific, Mountain, Central or Eastern) is highlighted on the 
 display’s US map, located to the right of the time display and 
 above the day of the week
• Release the UP ( ? ) button. The Time Zone is set.
TIME AND CALENDER
• Press and hold MODE button until the day of week language 
 abbreviation “ ” will flash
• Press the UP (? ) or DOWN (? ) selecting the day of the week 
 in English, German, French, Italian, Spanish, Dutch or Swedish.
• After the language of weekday is set, press MODE button 
 to confirm and move to the next parameter (year)
• Continue setting the year, month, day, time format (12 or 24 
 hours), local hour and minutes, using the same technique
• After programming is complete the display will return to the 
 default hour and minutes with seconds display.
CLOCK ALARMS
There are two time alarms – Weekday alarm ( ) and Single 
day alarm( ) - and one Ice Warning Alarm ( ).
• If Weekday ( ) alarm is activated, it will sound at the set 
 time and the alarm icon will flash Mondays through Fridays 
• If Single ( ) day alarm is activated, it will sound at the set 
 time and the alarm icon will flash only for this specific day and 
 will not activate on subsequent days
• If Ice Warning Alarm ( ) is activated, it will sound 
 at the set time and alarm icon will flash once the remote 
 temperature for Channel One (1) will reach 32°F(0°C) and 
 below 
NOTE: Ice Warning Alarm can be set only if Weekday 
and/or the single alarm are programmed.
SETTING THE WEEKDAY ( ) AND SINGLE DAY ( )
ALARMS
• Press ALARM button once to enter into the alarms setting 
 mode. The default alarm is a Weekday alarm ( ). The 
 abbreviation “ ” with a letter “ ” next to it will be 
 displayed, if the alarm has not been set previously
• Press and hold ALARM button for two seconds. The hour digit 
 will flash
7
1
