Meade Instruments 1697 Computer Drive System For LXD 650 and LXD 750 Mounts - Part 2 - Manual (Page 21)

-
40
-
Command :Gt#
Returns sDD*MM#
Gets the latitude of the currently selected site.
Command :St sDD*MM#
Returns Ok
Sets the latitude of the currently selected site.
Command :Gg#
Returns DDD*MM#
Gets the longitude of the currently selected site.
Command :Sg DDD*MM#
Returns Ok
Sets the longitude of the currently selected site.
Command :GG#
Returns sHH#
Gets the offset from Greenwich Mean Time.
Command :SG sHH#
Returns Ok
Sets the offset from Greenwich Mean Time.
Command :W1# :W2# :W3# :W4#
Returns Nothing
Sets the current site number.
c. Telescope Motion
Command :Mn# :Ms# :Me# :Mw#
Returns Nothing
Starts motion in the specified direction at the current rate.
Command :MS#
Returns 0, 1, 2, or 3 (see description)
Slews telescope to current object coordinates. 0 is returned if the telescope can complete the slew,
1 is returned if the object is below the horizon, and 2 is returned if the object is below the ‘higher’
limit. If 1 or 2 is returned, a string containing an appropriate message is also returned. If 3 is
returned, the telescope can hit the tripod.
Command :Qn# :Qs# :Qe# :Qw#
Returns Nothing
Stops motion in the specified direction. Also stops the telescope if a slew to object is in progress.
Command :Q#
Returns Nothing
Stops a slew to an object.
Command :RG# :RC# :RM# :RS#
Returns Nothing
Sets the motion rate to guide (RG), center (RC), find (RM), or slew (RS).
d. Library/Objects
Command :Gr#
Returns HH:MM.T#
Gets object Right Ascension.