Meade Instruments ETX-LS Software Update Instructions - Manual (Page 9)

ASU SOFTWARE UPDATE INSTRUCTIONS - LS TELESCOPE
www.meade.com Page 9 of 20 Rev. 26-Oct-2009
1.2.11. Press ENTER to start the software update.
1.2.12. The copying and validating of large files to the telescope
will take less than an hour.
1.2.13. “Take SD out”
Restart
1.2.14. Turn the LS telescope power off and on; the new version
will be displayed on the handbox startup screen.
1.2.15. Enjoy your updated telescope!
1.3. A
UTOSTAR
S
UITE
1.3.1. Install the Planetarium and Telescope Control software,
“Autostar Suite” version 5.5 (or higher), from the DVD
installation disk you received with your telescope.
1.3.2. Place the DVD in your PC disk drive.
1.3.3.
Select “Install AutoStar Suite”; the Installation Wizard
will begin.
1.3.4. Follow the on-screen prompts to install several software
modules.