Meade Instruments LX90 ACF/SC - Manual (Page 5)

5
Fig. C: Extend the tripod legs out.
Fig. D: Remove 2 nuts and spring from threaded rod. Leave
the washer on the rod.
Fig. E: Slide spreader over threaded rod. Note the
washer on the rod.
Fig. F: Insert spring into
hole on top of tripod head.
Fig. G: Thread the first nut as
far down as it will go. Then
thread the second nut down
onto the first nut
flat side
Fig. B: Field Tripod (collapsed). Fig. A: Field Tripod with legs extended.
7
8
6
5
2 1
4
3
(1) Tripod Head
(2) Threaded Rod
(3) Tension Knob
(4) Spreader Bar
(5) Leg Lock Knobs
(6) Extension Strut
(7) Tension Hub
(8) Attachment Nuts
and Spring (not
visible)
Fig. H: Loosen leg lock lever, extend inner
extendable leg, and re-lock lock lever.
lock-lever