MB QUART QUB Polaris - Manual (Page 5)

P/N 9925685 Rev 01 09/14 Page 5 of 8
4. Align audio mount bracket (7) with pod (G) and use
as template to drill the holes of dia 5/16” as shown
in figure.
G
7
5. Fasten audio mount bracket (7) with audio mount
base (6) using four screws (10) and nyloc nuts (11).
Tighten screws until snug.
6
7
10
11
3. If you cannot remove the cluster by hand, consider
removing the upper pod (G) by removing three
screws (H) as shown in figure.
G
H