MB QUART QUBOne - Manual (Page 6)

BLUETOOTH CONNECTION
When the speaker is turned on, you should hear a voice prompt and the blue pairing LED
on the side of the device will fl ash quickly indicating that pairing mode is activated and it
is searching for a Bluetooth source. The blue LED will fl ash slowly when it is attempting to
connect to the device it was paired to last.
Go to the Bluetooth menu of your source device and connect to QUBOne from the list of
devices.
Once the connection is achieved, the pairing LED will stop fl ashing and the speaker will
announce “QUB is now connected”.
You are now connected and can play from your source.
6
Make sure that no other source in range is connected. Only one connection can be made
at a time, The speaker may automatically connect to a source it has been paired with in the
past.
Turn off the speaker, then on again. Try pairing again.
Make sure the source is Bluetooth compatible and that the Bluetooth is activated.
Review your source device documentation for Bluetooth pairing instructions.
TROUBLE CONNECTING?
7