Mayline File Harbor Cabinet Reference Shelf - Manual (Page 2)

6. Move the Reference Shelf inside the cabinet, keeping it at least a few inches above the shelf
clips until the back of the shelf gently touches the back of the cabinet.
7. Level the Reference Shelf, be sure to keep it above the shelf clips. Kneeling down with your
hands under the shelf, so that you can see the bottom of the shelf clearly, tip the front of the shelf
up at about a 45 degree angle.
8. Move the Reference shelf carefully so the slots at the rear of the side
flanges of the shelf begin to slide over the rear shelf clips.
9. Ease the front of the Reference Shelf down, and push it back, so that the rear shelf clips are
resting against the ends of the slots at the back of the shelf. As the shelf becomes level, the
notches in the side flanges at the front of the shelf should engage the front shelf clips.
10. Make sure that the Reference Shelf is firmly seated in place. If it is loose, check to make sure
that the four shelf clips are level, and that the Shelf end flanges are properly engaged with the shelf
clips.