Mayline File Harbor Cabinet Reference Shelf - Manual

Kwik-File
,
LLC
File Harbor Cabinet
Reference Shelf
MRS48: 42" Reference Shelf for 48" wide Cabinet
MRS42: 36 3/4" Reference Shelf for 42" wide Cabinet
MRS36: 30 3/4" Reference Shelf for 36" wide Cabinet
Tools required: Blade Screwdriver
1. Remove packaging material. NOTE: Check for concealed damage. Report any damage to
carrier.
3. To install the Reference Shelf
successfully, you will need about 15"
clear space above it in the cabinet
(no components installed in the
space).
4. See the attached Configuration
Guide for the recommended spacing
between shelves. For example, if you
are storing color-coded end-tab files,
12 slots will be needed for the
Reference Shelf and its file folders (or
11 slots between shelves). Place the
Shelf clips (small tips with flat ends
are inserted upwards -
in the proper slots in
the inside end panels.
5. Make sure the cabinet doors are
open. While facing the
cabinet, hold the Reference Shelf
right side up.
Tip one end of the shelf higher than
the other end to clear the doors.
2. Remove the 4 shelf clips from the plastic
bag taped to the underside of the
Reference Shelf. Remove the optional
Backstop from the underside of the shelf if
ordered.