Billion Electric Company BIPAC 8500 - Manual (Page 12)

Billion BIPAC-8500 / 8520 SHDSL VPN Firewall Bridge / Router
Chapter 2: Installing the Router
The Rear Ports
1
2 3
4
5 *6
＊
Only the BIPAC-8520 has two Line jack ports. BIPAC-8500 has one.
Port Meaning
1
Power Switch Power ON/OFF switch
2
PWR Connect the supplied power adapter to this jack.
3 RESET
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds
: reset the device
6 seconds above
: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password)
4
LAN
1X — 4X
(RJ-45 connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
5
CONSOLE
Connect a PS2/RS-232 cable to this port when connecting to a
PC’s RS-232 port (9-pin serial port).
6
LINE
1X — 2X
(RJ-11 connector
Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the A SHDSL line.
8