Mayline 500 Series High-Back Chair - Manual (Page 2)

Item number: UL550HEZBLK
E X E C U T I V E H I G H B A C K E Z C H A I R
Item # Description Quantity Part #
1
2
3
4
5
6
~
Casters
5 Star Base
Telescoping Cover
Gas Lift
Seat and Back Cushions
w/Arms & Seat Plate
Wrenches (Attached to seat
cushion bottom)
Pre-assembled Seat Plate
5
1
1
1
1
2
1
11625
11673slt
11626
11708
11692**
~
11601
A. Remove all parts from carton and separate them into part number groups as indicated in the parts list.
B. To begin assembly, place the 5 star base (2) upside down and insert the casters (1) into bottom of the base (2).
C. Turn the base (2) right side up on the floor and insert the gas lift (4) into center hole on the base (2).
D. Place the telescoping cover (3) over the gas lift (4) and rest it on the base (2).
E. Place the seat and back cushions with arms and seat plate (5) on top of gas lift (4) and press down until fully
engaged.
F. Standing in front of the chair, push the back cushion into an upright position. Check to make sure the pins have
locked into the arm holes correctly. (Refer to Diagram 1 and Diagram 2 for proper assembly)
G. Periodically (every 90 days) make sure that the screws are still fully tightened.
ATTENTION: Make certain all screws are fully tightened before using chair.
P A R T S L I S T
A S S E M B L Y I N S T R U C T I O N S
U.S. Patent: D542,578