Mayline 100 Series Mid-Back Chair - Manual (Page 2)

Item number: ULMGRBLK / ULMGRBUR
M A N A G E R I A L M I D - B A C K C H A I R
A. Remove all parts from carton and separate them into part number groups as indicated in parts list.
B. To begin assembly, place 5 star base (2) upside down and insert casters (1) into bottom of base (2).
C. Turn base (2) right side up on the floor and insert gas lift (4) into center hole on base (2).
D. Place telescoping cover (3) over the gas lift (4) into center hole on base (2).
E. Attach seat plate (5) to seat cushion (7) (with arrow on seat plate facing front of chair) by inserting 1-1/4"
machine screws (9) and tighten screws.
F. Align back rest cushion (8) with seat cushion (7) by positioning back support plate (10) onto the bottom
of seat cushion (7) with 1" machine screws (11). Do not tighten the screws completely.
G. Tighten the arms (6A & 6B) onto the bottom of seat cushion (7) by using 1” machine screws (11) and
onto the sides of back rest cushion (8) by using 1-1/2” machine screws (gun metal) (12). Now tighten
all screws.
H. Place the assembled chair on top of gas lift (4) and press down until fully engaged.
I. Periodically (every 90 days) make sure that the screws are still fully tightened.
ATTENTION: Make certain all screws are fully tightened before using chair.
Item # Description Quantity Part #
1.
2.
3.
4.
5.
6A.
6B.
7.
8.
9.
10.
11.
12.
13.
H
Casters
5 Star Base
Telescoping cover
Gas Lift
Seat Plate
Left Arm
Right Arm
Seat Cushion
Back Rest Cushion
1-1/4” Machine Screws
Back Support Plate
1” Machine Screws
1-1/2” Machine Screws
(Gun Metal)
Wrenches
Hardware Pack
5
1
1
1
1
1
1
1
1
4
1
8
2
2
1
11625
11623
11626
11708
11601
11636**
11636**
11641**
11634**
H
~
H
H
H
11607
A S S E M B L Y I N S T R U C T I O N S
P A R T S L I S T