beautypg.com

Mayline 120 Degree Starter User Manual

Page 6

background image

11

Lay pan (4) onto inside trough side flanges (3).

Secure pan (4) to trough sides (3) using pine tree clips
(E11).

12.

Install slam latch (E8) into inner leg panel (10 &

11) as shown.
13.

Insert tabs in the bottom of inner leg panel (10 or

11) into slots in leg (1) or corner connector (5). Rotate

inner leg panel (10 or 11) up so that slam latch catches

flange on pan (4).

14.

Install outside leg panels (9) by aligning one

flange with the inside edge of the tube and applying

pressure to create a curve in the end panel that allows

2nd flange to slide inside edge of tube.

15.

Insert square hole plugs (E7) and pine tree clips

(E10) into holes in beam (2). NOTE: This step should be
done after privacy panels or monitor posts are installed in

the beam.

&