Mayline Dual Adjustable Rack - Manual (Page 3)

(3)
6. Select the desired height where
components will be mounted. Install Cage
Nuts (E8) into selected holes (2 per support).
TO INSTALL CAGE NUTS (E8):
A.) Place bottom of Cage Nut through
square hole from back side of rail (see detail
at right) allowing the lower portion of the Cage
Nut to grip the rail. See Fig. 4
B.) Compress the upper portion of the
Cage Nut with your thumb and snap Cage
Nut into place.
TO REMOVE CAGE NUTS (E8):
Compress Cage Nut with pliers.
(Additional Racks)
7. Attach Racks using Screws (E1), Washers
(E4), and Nuts (E3). (6 places) See Fig. 5
Fig. 4
Fig. 5