beautypg.com

Mayline TechWorks Corner User Manual

Page 2

background image

1. Select height for table using the holes in the Upper Leg (3). See Fig.1

2. Insert Screws (E3) through Upper Leg (3) and Lower Leg (4) at desired

position (12x). Secure using four Lock Washers (E6) and four Hex Nuts
(E5) where shown. See Fig 2. Do not tighten hardware at this time.

3. Assemble Spreaders (2) and Leg Assembly (3 & 4) and secure using Lock Washers (E6)
and Nuts (E5). See Fig. 3

4. Assemble Corner Upper Leg (5), Corner Lower Leg (6) and Spreaders (2) at the same

height as the Leg Assembly (3 & 4) using Screws (E4), Lock Washers (E6) and Nuts (E5). Do
not tighten hardware at this time.

(2)