Mayline SRFC3871 - Manual (Page 3)

5. Now that both lower and upper levels have
been combined into one large organizer, carefully
place the unit on its back. Insert both lower and
upper fiberboard back panels; then insert inside
header panel (with 6 slots) with large corner
cutouts toward back of unit (upper level only).
6. Install corrugated inside end panels with feet
on bottom and large corner cutout to top rear of
sorter, and 3 shelf slots, in upper level only;
install corrugated inside end panels with 11 shelf
slots in lower level. Press inside end panels
firmly against outside end panels, making sure
that they are tight against the bottom shelf (lower
level only).
7. Install one corrugated shelf into the slots in the
inside end panels, with the short folded side of
the shelf on the bottom. Repeat with the
remaining shelves in both upper and lower levels,
ending with the last shelf in upper level resting on
the bottom of that level.