Mayline SRF3837 - Manual (Page 4)

8. Install plastic strips on front edge of each shelf,
with the short edge of the plastic strip under the
bottom, and the longer edge over the shelf top.
Roll each strip onto the shelf edge and firmly into
place. Repeat for all shelves.
9. The grooves in the front of each plastic strip
hold the paper labels provided. Separate each
label along the perforations; then insert in the
bottom groove, and push the label into place,
tucking the top of label into the top groove with
your fingernail. (Labels can be created using a
PC and printer or typewriter as desired, but
before separating.)