Mayline SRF3837 - Manual (Page 2)

1. Tools required: Phillips screwdriver. Unpack
carton; then identify and count all parts.
2. Place a 2" thick shelf with open side down on
the floor; front edge has slots at each end . Install
outside end panels: insert tab through slot in
front as shown, and turn back of end panel until it
fits behind back of shelf. Repeat with other side.
Insert 4 screws through outside end panel and
shelf at rear corners; fasten securely.
3. Install top 2" thick shelf by sliding onto tabs of
outside end panels. Pull out the back edges of
the outside end panels so the shelf can be
lowered into place; then return outside end
panels to their original position. Install 4 screws
through upper rear corners to complete assembly
4. Carefully place the unit on its back; insert
fiberboard back panel.