Love The Drive Sebring Wind Deflector 1996 to 2000 User Manual
Page 3
Included with the wind deflector you received
two snap screws. You will need a #2 Philips
screw driver to replace two screws on our car.
The two screws that need to be replaced are
on the trim panel beside the back seat near
the top.
Unscrew both of the black screws on each said
of your car and replace them with the two
snap screws provided. You will only have to do
this once.
The rear bracket has a strap with a female
snap which attaches to the male snap on the
trim panel
The snap strap is attached easily from
underneath the wind deflector. Attach
the snap strap on both sides of the car
on the quarter trim panel.