Love The Drive Mercedes CLK 200, 230, 320, 430 & 55 1997 to 2003 - Manual (Page 2)

The rear brackets will rest on the seatbelts
when you first put the wind deflector into the
backseat.
Attach the silver hook to the trim panel
beside the bottom on the rear seat. Pull
the strap snug, it does not have to be
tight. You are now done, flip the top
panel of the wind deflector up and enjoy!
Lift the seatbelt up and allow the rear bracket
to hook on to the trim panel. Release the
seatbelt and it will cover the rear bracket.
repeat on the other side.
When not in use the wind deflector can be
stored in the trunk. You will need to loosen
the thumbscrews on the front brackets.
Then flip the brackets around and loosely
tighten the thumbscrews. Do NOT tighten the
screws so much as to push the bracket into
the mesh. Only loosely tighten the
thumbscrews.
There are two straps on the bottom of the wind
deflector that attach to the bottom ofthe trim panel.