Love The Drive BMW Windstop 3 series (E46) 323, 325, 330, M3 2000 to 2006 - Manual (Page 2)

HOW TO STORE
YOUR WIND
DEFLECTOR IN
YOUR TRUNK
First, reverse the
previous steps to
remove your wind
deflector from your
Sebring / Chrysler 200.
Then remove the top two thumb
screws and loosen (but don't
remove) the bottom two thumb
screws.
Next slide the barrel bolt down
and insert the two thumb
screws into the top two holes.
When storing you will need
to fold in the rear brackets.
Loosen the thumb screw by
one turn (Do not remove
these screws, only loosen)
Then push the rear backet
in so it touchs the bottom
panel. Then place into the
storage bag.
The wind deflector will fit into your
trunk when not is use. It is a tight
fit. Start by putting the side with the
plastic barrel bolts in first. Place
one end into the far corner of the
trunk.
Then lower the wind defelctor in. Your trunk will
have to be empty when you put the wind deflector
in.
Once inside the trunk you can stand the
wind defelector upright so there is room for
your bags, etc.