Longevity FORCECUT 40D new User Manual
Page 15
FORCECUT 40- 40 AMP Plasma cutter 110v/220v
15 |
P a g e
Operation environment
1. The cutting machine can perform in an environment where conditions are particularly harsh
and with outside temperature between –10 and +40 degrees centigrade with a dampness level
of max 80%.
2. Avoid using in sunshine and dropping environment.
3. Keep machine dry and avoid water in the machine.
4.
Do not use the cutting machine in an environment where conditions are polluted with high
concentrations of dust or corrosive gas in the air.
CUTTING NOTES
1. Make sure copper tip does not come in direct contact to work piece when user is cutting.
Torch should be inclined and it is 1 mm from inter-hole of copper tip to work piece in order
to protect copper tip.