Loadstar Sensors LoadVUE-CG (Center of Gravity) User Manual
Page 3
• 2
Loadstar Sensors, Inc. •
www.loadstarsensors.com
11.
Click on
Log View ->
to switch to the log window.
12.
In this view,
o
Check the
Log Sensor Readings to File
to enable logging. The logging can either be at
predetermined intervals or on demand.
o
Click on the
Log Interval
to a select a log interval time. (Log at 1 sec, 10 sec, 1 min … etc)
and then click
Start
to start logging.
o
If you have selected the ‘On Demand’ option, after you click
Start
, click on the
Log Now
button whenever you want to log a single reading of the scale.
o
Click
Stop
to stop reading the scale and to stop logging.
o
Click on
<- CG View
and
Log View ->
buttons on the toolbar to switch between the two
views.
Select Log Interval.
Select Log File.
Click here to log a
single reading
Check this box to
enable logging.