Loadstar Sensors LV-100 - Manual (Page 4)

LoadVUE User Guide • 3
HyperTerminal Operation of iLoad Digital USB Sensors
When your iLoad Digital USB sensors is connected and correctly installed, you should see a COM port assigned to it as
shown highlighted in the following screen shot of the Device Manager. You can view the Device Manager by going to the
Control Panel in Windows and double-clicking on
System . On the System dialog box click on the Hardware tab and then click
on the Device Manager button.
If you have more COM ports than you have sensors connected, you can double-click on the entry for a COM port. The ports
associated with iLoad Digital USB sensors will indicate that they have FTDI driver as shown below.
You are now ready to start using your iLoad Digital USB sensor.
HyperTerminal Operation
In Windows XP, launch the HyperTerminal program.
Start...All Programs...Accessories...Communications...HyperTerminal
Note: Windows Vista does not include a terminal client. However, free terminal client software like Teraterm is available.
Loadstar Sensors, Inc. • www.loadstarsensors.com