Loadstar Sensors iLoad Series Loadcells - Manual (Page 3)

Alternatively, you can attach the sensors to the platform with the three mounting holes –
with screws coming in from the other side of the platform. You can invert the platform
with the sensors attached to convert into a scale.
Overload Protection:
Please make sure to not load the sensors beyond the rated overload of 1.5X of capacity.
Be gentle and careful especially when placing loads on the sensor since instantaneous
loads can be several times higher than the static load being placed.
The sensor calibration can be affected in case of exceeding rated overloads. In extreme
cases, the sensor can be severely damaged.
Thanks for your purchase. We hope our sensor meets your application needs and you
will come back to us for additional load sensors!
Feel free to call us if we can be of additional help.
Loadstar Sensors Team
Disclaimer and Legal Information: Information in this document is provided in
connection with Loadstar Sensors products. No license, express or implied, by estoppel
or otherwise, to any intellectual property rights is granted by this document. Loadstar
Sensors assumes no liability whatsoever, and Loadstar Sensors disclaims any express
or implied warranty, relating to sale and/or use of Loadstar Sensors products including
liability or warranties relating to fitness for a particular purpose, merchantability, or
infringement of any patent, copyright or other intellectual property right. Loadstar
Sensors products are not intended for use in medical, life saving, or life sustaining
applications. The information in this document is furnished for informational use only, is
subject to change without notice, and should not be construed as a commitment by
Loadstar Sensors. Loadstar Sensors assumes no responsibility or liability for any errors
or inaccuracies that may appear in this document or any software that may be provided
in association with this document. Loadstar Sensors reserves the right to make changes
to its products at any time in the future. The specifications mentioned in this document
are provided as guidelines only and may change in the future to reflect changes in
design and availability of better test data. Copyright ©Loadstar Sensors, Inc. 2005-2009.