Labnet 611D Laboratory Incubators - Manual (Page 12)

CLEANING AND ROUTINE CARE
Section
8
Both the interior and exterior of the incubator should be wiped down with a soft cloth
periodically to prevent any build-up of dust and grime.
Any spills in the incubator should be cleaned immediately. Cleaning may be performed
with a soft, damp cloth. If required, the chamber may be disinfected. Before using any
type of disinfectant or cleaning agent in the incubator, check with the product manufacturer
to ensure that the product will not damage the stainless steel interior of the incubator. After
cleaning the incubator, rinse the cleaned surface with a damp cloth, using water only. Dry
with a clean cloth.
Do not pour liquid into the chamber or immerse the unit in liquid. DO NOT use chlorine-
based bleaches or abrasives as these will damage the stainless steel.
12