Kuryakyn 4220 UNIVERSAL HELMET LOCK - Manual (Page 2)

PAGE
2
STEP 4
Tighten the screws evenly and ensure that the helmet lock is properly clamped onto the tube.
UNIVERSAL HELMET LOCK INSTALLATION
Avoid damage to the motorcycle. Protect painted surfaces
with a soft cloth or blanket.
Ensure that the installation of this product does not interfere with
any painted, moving, or hot surfaces that could be damaged or
cause damage to a helmet. It is the end user’s responsibility to de-
termine the best mounting location.
Ride On!
It is the end user’s responsibility to ensure that all of the fasteners
(including pre-assembled) are tightened before operation of the motorcy-
cle. Küryakyn will not provide warranty coverage on products or compo-
nents lost or damaged due to improper installation or lack of maintenance.
Periodic inspection and maintenance are required on all fasteners.
ENSURE THAT THIS PRODUCT DOES NOT INTERFERE WITH
THE PROPER AND SAFE OPERATION OF THE MOTORCYCLE.
FAILURE TO INSTALL THIS PRODUCT COULD LEAD TO LOSS
OF CONTROL RESULTING IN SERIOUS INJURY OR DEATH.
AVOID LOSS OF CONTROL, DAMAGE AND SERIOUS INJURY OR
DEATH. DO NOT OPERATE THE MOTORCYCLE WITH THE HELMET
LOCKED INTO THE UNIVERSAL HELMET LOCK.