beautypg.com

Ride on, Tappet block cover for indian – Kuryakyn 5641 TAPPET BLOCK COVER for INDIAN User Manual

Page 2

background image

PAGE

2

STEP 2

Refer to

PIC 1

. Remove the two OEM screws; set them aside, they will be reused.



STEP 3

Slide the top of the cover in between the tappet blocks, then
rotate it down, and gently push it straight in until the screw
holes align.



STEP 4

Secure the Cover to the tappet blocks with the screws from

STEP 2

. Leave the screws loose until both have been started

in their threads.



STEP 5

Torque the screws to 85-115 in lbs (9.6-12.9 Nm).

TAPPET BLOCK COVER for INDIAN

INSTALLATION

Ride On!

PIC 2

SLIDE THE TOP OF THE COVER IN BETWEEN THE TAPPET BLOCKS, THEN
GENTLY PUSH STRAIGHT IN UNTIL THE SCREW HOLES ALIGN

It is the end user’s responsibility to ensure that all of the fasteners
(including pre-assembled) are tightened before operation of the motorcy-
cle. Küryakyn will not provide warranty coverage on products or compo-
nents lost or damaged due to improper installation or lack of maintenance.
Periodic inspection and maintenance are required on all fasteners.

PIC 1

REMOVE THE TWO OEM SCREWS