Britax Diplomat P321900 - Manual (Page 28)

26
Using the Versa-Tether
Consult your vehicle owner’s manual for 1
designated tether anchorage locations.
Locate the tether on the rear of the child 2
seat and remove the tether from the
pouch.
Place the tether up and over the child seat 3
back.
Install the child seat using the LUAS or the 4
vehicle belts according to the instructions
in this manual.
Tilt the tether release tab then pull the 5
tether strap to fully extend it into a “V”
shape.
Locate the hook on the strap and loosely 6
attach the tether to the vehicle’s designated
tether anchor.
See figure A for a forward-facing installation. •
See figures B and C for a rear-facing •
installation.
Pull the tether adjuster strap to remove all 7
slack. Roll up any excess webbing and store
in tether pouch.
Verify there is tension in the tether strap 8
and that the child seat is properly secured.
The child seat is secure when it cannot be •
moved front-to-back or side-to-side more
than 2.5 cm (1 in.) at the belt path.
Installation : Versa-Tether
OR
A
OR
b
C